sharpening bowl gouges: aroundthewoods.comsharpening a wood turning bowl gouge with long wings, home made jig ht... mitch - Wood Turning 2008-05-29 16:42:35
	sharpening Oland wood turning tools: aroundthewoods.comSharpening Oland wood turning tools with a home made jig. http://aroun... mitch - Tools 2008-05-29 16:42:18
	sharpening roughing gouges: aroundthewoods.comSharpening wood turning roughing gouges with home made jig. http://aro... mitch - Tools 2008-05-29 16:42:07
	sharpening roughing gouges: aroundthewoods.comSharpening wood turning roughing gouges with home made jig. http://aro... mitch - Tools 2008-05-29 16:41:40
	sharpening wood turning tools: aroundthewoods.comSharpening a roughing tool and an Oland tool on a home made jig. http:... mitch - Tools 2008-05-29 16:41:28
	sharpening spindle gouges: aroundthewoods.comSharpening wood turning spindle gouge on a home made jig. http://aroun... mitch - Tools 2008-05-29 16:41:17
	Roughing with the Oland ToolUsing a 1/2" and 3/8" Oland tool to rough down to a bead. http://aroun... mitch - Wood Turning 2008-05-29 16:41:00
	Cutting Endgrain: Homemade Hook ToolUsing a shop made hook tool to cut endgrain. http://aroundthewoods.com... mitch - Wood Turning 2008-05-29 16:40:48
	Wood for Spindle TurningPreparing a block of wood for spindle turning using a chain saw and a ... mitch - Wood Turning 2008-05-29 16:40:20
	Using a Roughing Gougewood turning a spindle blank to round with a roughing gouge, the basic... mitch - Wood Turning 2008-05-29 16:40:01
	Wood Turning: Wooden Spoon (1) MountingMounting a wood turning blank on a wood lathe to turn a wooden spoon w... mitch - Wood Turning 2008-05-29 16:39:49
	Sharpening Oland Woodturning ToolsSharpening the Oland tool with a home made jig from aroundthewoods.com... mitch - Tools 2008-05-29 16:39:36
	Wood Turning: Wooden Spoon (2) Mounting in the ChuckRoughing down the shaft of a wooden spoon. http://aroundthewoods.com... mitch - Wood Turning 2008-05-29 16:38:19
	Wood Turning: Wooden Spoon (3) Roughing the ShaftRough turning the shaft of the spoon using a skew. from http://aroundt... mitch - Wood Turning 2008-05-29 16:38:02
	Wood Turning: Wooden Spoon (4) Shaft to Bowl TransitionFinishing the roughing of the shaft as we get to the bowl. Watch your ... mitch - Wood Turning 2008-05-29 16:37:40
	Wood Turning: Wooden Spoon (5) Outlining the Bowlcontinuing the wooden spoon we now outline the bowl. Most of the turni... mitch - Wood Turning 2008-05-29 16:37:21
	Wood Turning: Wooden Spoon (6) turning and decorating the haThe handle is finish turned and the end is decorated with a couple of ... mitch - Wood Turning 2008-05-29 16:37:05
	Wood Turning: Wooden Spoon (7) sanding and parting off.The spoon is sanded and parted off from the lathe. All that remains is... mitch - Wood Turning 2008-05-29 16:36:41
	Sharpening Bandsaw BladeSharpening a bandsaw blade on the saw. Test cut through 3" spalted map... mitch - Wood Turning 2008-05-29 16:36:23
	Turning a European Style Pen (1) Roughingroughing out the blanks for a European style pen in bocote using a rou... mitch - Pen Turning 2008-05-29 16:36:06
	Turning a European Style Pen (2) Finish TurningFinish turning the blanks for a European style pen in bocote using a s... mitch - Pen Turning 2008-05-29 16:35:39
	Turning a European Style Pen (3) Fitting the center BandFitting the center band on the pen with a parting tool. More at http:/... mitch - Pen Turning 2008-05-29 16:35:22
	Turning a European Style Pen (4) SandingSanding the pen.More at http://aroundthewoods.com... mitch - Pen Turning 2008-05-29 16:35:10
	Turning a European Style Pen (5) FinishingFinishing the pen with turner's polish.http://aroundthewoods.com... mitch - Pen Turning 2008-05-29 16:34:51
	Icicle Christmas Ornament - Shapingwood turning an icicle for the Christmas tree. Shaping the body. from ... mitch - Wood Turning 2008-05-29 16:34:35
	Icicle Christmas Ornament - Mounting and RoughingWood turning an icicle for the Christmas tree. Shaping the body. from ... mitch - Tools 2008-05-29 16:34:21
	Icicle Christmas Ornament - the HeadWood turning an icicle for the Christmas tree. Shaping the head. from ... mitch - Wood Lathe 2008-05-29 16:33:36
	Icicle Christmas Ornament -Drilling and HangingWood turning an icicle for the Christmas tree. Drilling the head and g... mitch - Wood Lathe 2008-05-29 16:33:19
	Roughing a Bowl (1) cutting the log to lengthCutting an ash log to prepare blanks for a bowl. http://aroundthewoods... mitch - Wood Turning 2008-05-29 16:33:01
	Roughing a Bowl (2) Ripping the BlanksRipping the blanks in two to make 2 bowl blanks per log section. http:... mitch - Pen Turning 2008-05-29 16:32:12
	Roughing a Bowl (3) Marking OutMarking out the blanks using simple home made templates. http://aroun... mitch - Wood Turning 2008-05-29 16:31:56
	Bowl Sanding - OutsideSanding the outside of a bowl with a shop made drill pad. http://www.a... mitch - Wood Turning 2008-05-29 16:31:24
	Bowl Sanding - InsideSanding the inside of a bowl with a shop made drill pad. http://www.ar... mitch - Wood Turning 2008-05-29 16:30:54
	Roughing a Bowl (4) Cutting the CornersCutting the corners of the bowl blank with a chainsaw to balance it an... mitch - Wood Turning 2008-05-29 16:30:40
	Roughing a Bowl (5) Mounting on the Lathemounting the bowl blank between centers on the lathe. http://aroundthe... mitch - Wood Lathe 2008-05-29 16:30:22
	Roughing a Bowl (7) the inside part aI have cut the inside roughing video in two to fit better on YouTube f... mitch - Wood Turning 2008-05-29 16:30:09
	Roughing a Bowl (8) the inside part bI have cut the inside roughing video in two to fit better on YouTube f... mitch - Wood Turning 2008-05-29 16:29:56
	Natural Edged Bowl (2) Outside (1)turning the outside of the natural edged bowl is interesting because i... mitch - Wood Turning 2008-05-29 16:29:43
	Natural Edged Bowl (3) Outside (2)While turning the bowl it is best to watch the edge of the piece. Howe... mitch - Wood Turning 2008-05-29 16:29:21
	Natural Edged Bowl (4) Outside (3)Refine CurveThe outside of the bowl is final roughed with an ogee curve as the bas... mitch - Wood Turning 2008-05-29 16:29:01
	Natural Edged Bowl (4) Outside (3)Refine CurveThe outside of the bowl is final roughed with an ogee curve as the bas... mitch - Wood Turning 2008-05-29 16:28:28
	Natural Edged Bowl (5) Inside RoughingRoughing the inside of the natural edged bowl, leaving a tenon for sup... mitch - Wood Turning 2008-05-29 16:28:10
	Natural Edged Bowl (3) Outside (2)While turning the bowl it is best to watch the edge of the piece. Howe... mitch - Wood Turning 2008-05-29 16:22:36
	Natural Edged Bowl (2) Outside (1)turning the outside of the natural edged bowl is interesting because i... mitch - Wood Turning 2008-05-29 16:22:17
	Natural Edged Bowl (1) MountingMounting a piece of pin cherry for a natural edged bowl using a hot gl... mitch - Wood Turning 2008-05-29 16:22:00
	Sharpening a Bowl GougeUsing homemade jigs to sharpen a bowl gouge for wood turning... mitch - Tools 2008-05-29 16:20:29
	Sharpening a Bowl GougeUsing homemade jigs to sharpen a bowl gouge for wood turning... mitch - Tools 2008-05-29 16:20:29
	Power SandingPower Sanding from the woodturning video "Bowl Basics: A Workshop with... mitch - Wood Turning 2008-05-29 16:19:36
	sharpening wood turning tools: aroundthewoods.comSharpening a roughing tool and an Oland tool on a home made jig. http:... mitch - Tools 2008-05-29 16:17:44
	JT Dunphy--Revealed Treasures in trees-- Part 1Woodturner JT Dunphy begins the process of turning a wooden bowl... mitch - Tools 2008-05-29 16:12:43
	Wood to BowlHere's one way of turning a lump of wood into a bowl using a woodturni... mitch - Tools 2008-05-29 15:54:24
	Woodturning: Oval Skew Training Vol.2More oval skew training from different angle. Material is birch.... mitch - Tools 2008-05-29 15:53:49
	Woodturning: Oval Skew TrainingOval skew training. Material is wallnut.Pientä harjoittelua ovaalilla... mitch - Tools 2008-05-29 15:53:07
	Woodturning - BellI turn a little bell from white alder. Sorry no sounds.... mitch - Tools 2008-05-29 15:52:44
	Thomas McCormick's Turned Wood ArtA video showing the process of wood turning and carving that Tom's wor... mitch - Tools 2008-05-29 15:51:27
	Perfection in FormExclusive Interviews with Sam Maloof, Bob Stocksdale and Kay Sekimachi... mitch - Tools 2008-05-29 15:51:09
	Woodturning at Brookfield Craft CenterMaster craftsman, Jim Degan, of the Brookfield Craft Center, demonstra... mitch - Tools 2008-05-29 15:50:43
	International Turning Exchange, Part 5The exhibition that came out of the ITE just closed at at the Wood Tur... mitch - Wood Turning 2008-04-04 03:16:04
	Portland Woodturning SymposiumThis is a small taste of one of the largest gatherings of woodturners ... mitch - Wood Lathe 2008-04-04 03:09:22
	Wood Turning: Wooden Spoon (3) Roughing the ShaftRough turning the shaft of the spoon using a skew. from http://aroundt... mitch - Wood Lathe 2008-04-04 02:59:19
	Roughing a Bowl (8) the inside part bI have cut the inside roughing video in two to fit better on YouTube f... mitch - Wood Turning 2008-04-04 02:54:34
	Roughing a Bowl (7) the inside part aI have cut the inside roughing video in two to fit better on YouTube f... mitch - Wood Turning 2008-04-04 02:53:43
	Woodturning a swamp kauri bowl part 1Woodturning: Turning a small wood bowl from 35 000 year old swamp kaur... mitch - Wood Turning 2008-04-04 02:31:09
	JT Dunphy--Revealed Treasures in trees-- Part 1Woodturner JT Dunphy begins the process of turning a wooden bowl... mitch - Wood Turning 2008-04-02 18:25:22
	Wood Pens with a rope twistPart 1 of 1: turning a wood pen with a rope twist on the Legacy Orname... mitch - Pen Turning 2008-04-02 17:35:47
	How to Make a Wood PenThe Making of a Wood Pen. From Wood Pens and Turnings (www.woodpensan... mitch - Pen Turning 2008-04-02 17:34:36
	Turning a European Style Pen (5) FinishingFinishing the pen with turner's polish.http://aroundthewoods.com... mitch - Pen Turning 2008-04-02 17:31:29
	Turning a European Style Pen (4) SandingSanding the pen.More at http://aroundthewoods.com... mitch - Pen Turning 2008-04-02 17:31:00
	Turning a European Style Pen (3) Fitting the center BandFitting the center band on the pen with a parting tool. More at http:/... mitch - Pen Turning 2008-04-02 17:30:47
	Turning a European Style Pen (2) Finish TurningFinish turning the blanks for a European style pen in bocote using a s... mitch - Pen Turning 2008-04-02 17:30:31
	Turning a European Style Pen (1) Roughingroughing out the blanks for a European style pen in bocote using a rou... mitch - Pen Turning 2008-04-02 17:30:19
	Introduction to penturningA brief introduction into turning wooden pens... mitch - Pen Turning 2008-04-02 17:26:13
	Basic Wood Pen Turning - Lathe ToolsThe basic tools you need to start turning wooden pens on a lathe.... mitch - Pen Turning 2008-04-02 17:23:55
	Basic Wood Pen Turning - Pen BlanksBrief description of wood and acrylic blanks used for pen making.... mitch - Pen Turning 2008-04-02 17:23:43
	Basic Wood Pen Turning-The Slimline-Part 1This is the first of several videos teaching how to turn the most popu... mitch - Pen Turning 2008-04-02 17:23:08
	Basic Wood Pen Turning-Barracuda 2 ChuckAn overview of the Barracuda CS3000 chuck by PSI Industries.... mitch - Pen Turning 2008-04-02 17:22:55
	Basic Wood Pen Turning-The Slimline Part 2Drilling the blanks for the Slimline Pen... mitch - Pen Turning 2008-04-02 17:22:40
	Basic Wood Pen Turning-The Slimline-Part 3How to sharpen the pen mill, use the pen mill and setting blanks on t... mitch - Pen Turning 2008-04-02 17:22:27
	Basic Wood Pen Turning-The Slimline Part 4Mounting the blank on the Jet Mini Lathe, checking the mandrel and ove... mitch - Pen Turning 2008-04-02 17:21:57
	Basic Wood Turning-The Slimline Part 5Start to finish turning the blank to finish stage. Video is in real ti... mitch - Pen Turning 2008-04-02 17:21:13
	Basic Wood Pen Turning-The Slimeline Part 6Sanding the Slimline blank.... mitch - Pen Turning 2008-04-02 17:20:55
	Basic Wood Pen Turning-The Slimeline Part 7Finishing the Slimline...how not to do it!... mitch - Pen Turning 2008-04-02 17:20:44
	Basic Wood Pen Turning-The Slimline Part 8Apply finish using boiled linseed and superglue.... mitch - Pen Turning 2008-04-02 17:20:32
	Basic Wood Pen Turning-The Slimline Part 9Conclusion--Assembly of the Slimline... mitch - Pen Turning 2008-04-02 17:20:17
	Basic Wood Lathe-Cutting Beads and CovesHow to practice cutting beads and coves with a wood lathe.... mitch - Pen Turning 2008-04-02 17:19:09
	Basic Wood Lathe-Lathe Tool Sharpening JigHow to build a homemade lathe tool sharpening jig for under $10.... mitch - Pen Turning 2008-04-02 17:18:51
	How to Use a Wood Lathe : Tips for Using Wood LatheFind out Tips for Using Wood Lathe for wood lathe project. Learn to ma... mitch - Wood Lathe 2008-04-02 17:12:37
	How to Use a Wood Lathe : Smoothing Handle With Wood LatheSmoothing the handle for wood lathe project. Learn to make furniture l... mitch - Wood Lathe 2008-04-02 17:12:20
	How to Use a Wood Lathe : Tips for Sanding Wood Lathe ProjectGiving the piece a smooth sand for wood lathe project. Learn to make f... mitch - Wood Lathe 2008-04-02 17:12:03
	How to Use a Wood Lathe : Rough Sand for Wood Lathe ProjectGiving the piece a rough sand for wood lathe project. Learn to make fu... mitch - Wood Lathe 2008-04-02 17:11:47
	How to Use a Wood Lathe : How to Square Wood for Wood LatheSquaring up the wood for wood lathe project. Learn to make furniture l... mitch - Wood Lathe 2008-04-02 17:11:35
	How to Use a Wood LatheShaping the handle for wood lathe project. Learn to make furniture lik... mitch - Wood Lathe 2008-04-02 17:11:09
	How to Use a Wood Lathe : Marking Turning Points for Wood LatheMarking the turning points for wood lathe project. Learn to make furni... mitch - Wood Lathe 2008-04-02 17:10:46
	How to Use a Wood Lathe : Smoothing Handle With Wood LatheSmoothing the handle for wood lathe project. Learn to make furniture l... mitch - Wood Lathe 2008-04-02 17:10:17
	How to Use a Wood Lathe : Marking Ends for Wood LatheMarking and cutting the ends for wood lathe project. Learn to make fur... mitch - Wood Lathe 2008-04-02 17:09:56
	How to Use a Wood Lathe : Measuring Wood for Wood LatheMeasuring the center of the block for wood lathe project. Learn to mak... mitch - Wood Lathe 2008-04-02 17:09:31
	Rounding Block With Wood LatheRounding the wood block for wood lathe project. Learn to make furnitur... mitch - Wood Lathe 2008-04-02 17:09:05
	Measuring Wood for Wood LatheMeasuring the center of the block for wood lathe project. Learn to mak... mitch - Wood Lathe 2008-04-02 17:08:49
	Chucking Block With Wood LatheChucking the wood block for wood lathe project. Learn to make furnitur... mitch - Wood Lathe 2008-04-02 17:08:29
	How to Use a Wood Lathe : Shaping Handle With Wood LatheShaping the handle for wood lathe project. Learn to make furniture lik... mitch - Wood Lathe 2008-04-02 17:07:14
	How to Use a Wood Lathe : Shaping Handle With Wood LatheShaping the handle for wood lathe project. Learn to make furniture lik... mitch - Wood Lathe 2008-04-02 17:06:50
	How to Use a Wood Lathe : How to Square Wood With Chop SawUsing the chop saw to finish the cutting for wood lathe project. Learn... mitch - Wood Lathe 2008-04-02 16:54:25